Older Years Suzuki DF 115A, Gear Case (C/R) - parts catalog
- Home
- Parts
- Outboard motors
- Suzuki
- Older years suzuki df 115a parts list
- Gear case c r
Gear Case (C/R)
- S/N 11503Z-310001 to 11503Z-31XXXX| Parts Diagram | ## | Part # | Description | Qty | Notes |
 | 1 | 55110-92J00-0EP | Gear Case Housing (C/R) | 1 | |
| 2 | 09263-28016 | .Bearing (28.6x38x31.8) | 1 | ||
| 3 | 55125-92J00 | Trim Tab | 1 | ||
| 4 | 55127-87D00 | Speedometer Hose Union | 1 | ||
| 5 | 55321-90J01 | Gear Case Anode | 1 | ||
| 6 | 55332-87D11 | Exhaust Seal Rubber | 1 | ||
| 7 | 55333-87D10 | Exhaust Seal Plate | 1 | ||
| 8 | 09100-06131 | Bolt (6x12) | 1 | ||
| 9 | 09116-08137 | Bolt (8x22) | 1 | ||
| 10 | 09116-10150 | Bolt (10x55) | 6 | ||
| 11 | 09117-10039 | Bolt (10x80) | 1 | ||
| 12 | 09160-06085 | Washer (6.5x15x1.0) | 1 | ||
| 13 | 09168-10022 | Drain Plug Gasket | 2 | ||
| 14 | 09202-08006 | Knock Pin (8x12) | 2 | ||
| 15 | 09248-10008 | Drain Plug | 2 | ||
| 16 | 09355-40805-00B | Hose (4x8x2000) | 1 | ||
| 17 | 09362-09008 | Nipple | 1 | ||
| 18 | 09407-10404 | Clamp (L:100) | 3 | ||
| 19 | 57633-90J02 | Propeller Nut Spacer | 1 | ||
| 20 | 57635-92J01 | Propeller Stopper | 1 | ||
| 21 | 09141-18005 | Nut 18mm | 1 | ||
| 22 | 09160-18028 | Washer (18.5x31x1.0) | 1 | ||
| 23 | 09204-03003 | Prop Nut Cotter Pin | 1 | ||
| 24 | 25700-92J00 | Gear Case Seal Kit | 1 |
1) All quantities shown are the total used for that part.
2) Dimensions of the parts in catalog are in Millimeters
3) Abbreviations used in catalog are as follows:
AR: As Required
ASSY: Assembly
E.NO.: Engine Number
F.NO.: Frame Number
D: Diameter
ID: Inside Diameter
OD: Outside Diameter
L: Length
LH(PORT): Left Hand Side
RH(STBD): Right Hand Side
PTT: Power Tilt & Trim
NT: Number of Teeth
OPT: Optional
OS: Oversize
STD: Standard
T: Thickness
US: Undersize
W: Width
W/: With
S, L, X, XX: Transom Type
SUS: Stainless Steel
S/N: Serial Number
(NLA): No Longer Available - Discontinued
Type:
S - Short Shaft 15"
L - Long Shaft 20"
X - X Long Shaft 25"
XX - XX Long Xhaft 30"
4) Inner Parts of an Assembly - Part name with a dot (.) in front as shown in the description column indicates the component of the assembly is also available individually and is included with the part above it.
