2003-2010 Suzuki DF 4, Tiller Handle - parts catalog
- Home
- Parts
- Outboard motors
- Suzuki
- 2003 2010 suzuki df 4 parts list
- Tiller handle
Tiller Handle
(2003-2010) - 2003 to 00402F-11XXXX| Parts Diagram | ## | Part # | Description | Qty | Notes |
 | 1 | 63111-91J21-0EP | Tiller Handle | 1 | |
| 2 | 63210-93E30 | Handle Grip | 1 | ||
| 3 | 63221-91J00 | Handle Rod | 1 | ||
| 4 | 63225-98601 | Throttle Adjust Plate | 1 | ||
| 5 | 63241-98601 | Handle Rod Support | 1 | ||
| 6 | 63244-986A0 | Throttle Adjust Knob | 1 | ||
| 7 | 63610-91J04 | Throttle Cable Assembly | 1 | ||
| 8 | 63620-91J00 | Throttle Cable Stopper | 1 | ||
| 9 | 63628-91J00 | Throttle Cable Stopper Plate | 1 | ||
| 10 | 09116-08097 | Bolt (8x50) | 1 | ||
| 11 | 09118-06098 | Bolt (6x25) | 1 | ||
| 12 | 09126-06015 | Screw (6x23) | 1 | ||
| 13 | 09136-05041 | Screw (5x20) | 2 | ||
| 14 | 09140-08023-XC0 | Nut (8mm) | 1 | ||
| 15 | 09148-06008 | Nut | 1 | ||
| 16 | 09160-08082 | Washer (8.5x16x1.2) | 1 | ||
| 17 | 09280-20004 | O-Ring | 1 | ||
| 18 | 09306-08016 | Bushing | 2 | ||
| 19 | 69714-91J20 | Engine Start Mark | 1 |
1) All quantities shown are the total used for that part.
2) Dimensions of the parts in catalog are in Millimeters
3) Abbreviations used in catalog are as follows:
AR: As Required
ASSY: Assembly
E.NO.: Engine Number
F.NO.: Frame Number
D: Diameter
ID: Inside Diameter
OD: Outside Diameter
L: Length
LH(PORT): Left Hand Side
RH(STBD): Right Hand Side
PTT: Power Tilt & Trim
NT: Number of Teeth
OPT: Optional
OS: Oversize
STD: Standard
T: Thickness
US: Undersize
W: Width
W/: With
S, L, X, XX: Transom Type
SUS: Stainless Steel
S/N: Serial Number
(NLA): No Longer Available - Discontinued
Type:
S - Short Shaft 15"
L - Long Shaft 20"
X - X Long Shaft 25"
XX - XX Long Xhaft 30"
4) Inner Parts of an Assembly - Part name with a dot (.) in front as shown in the description column indicates the component of the assembly is also available individually and is included with the part above it.
