2003-2010 Suzuki DF 4, Drive Shaft - parts catalog
Drive Shaft
(2003-2010) - 2003 to 00402F-11XXXX| Parts Diagram | ## | Part # | Description | Qty | Notes |
 | 1-1 | 57111-91J20 | Drive Shaft (S) | 1 | |
| 1-2 | 57111-91J30 | Drive Shaft (L) | 1 | ||
| 2 | 09181-10156 | Washer | 1 | ||
| 3 | 57130-91J00 | Drive Shaft Bushing | 1 | ||
| 4 | 09380-10003 | Circlip | 2 | ||
| 5 | 57311-98601 | Pinion Gear | 1 | ||
| 6-2 | 09160-10089 | Washer (1.80) (NLA) | 1 | ||
| 6-5 | 09160-10092 | Washer (2.10) (NLA) | 1 | ||
| 6-3 | 09160-10090 | Washer (1.90) (NLA) | 1 | ||
| 6-1 | 09160-10088 | Washer (1.70) | 1 | ||
| 6-4 | 09160-10091 | Washer (2.00) (NLA) | 1 | ||
| 7 | 09169-12002 | Washer | 1 | ||
| 8 | 57510-98611 | Forward Gear | 1 | ||
| 9 | 57521-98601 | Reverse Gear | 1 | ||
| 10-2 | 09160-12070 | Thrust Washer (0.80) (NLA) | 1 | ||
| 10-3 | 09181-12111 | Thrust Washer (1.00) | 1 | ||
| 10-1 | 09181-12008 | Thrust Washer (0.60) (NLA) | 1 | ||
| 11 | 09181-12111 | Thrust Washer (1.00) | 1 | ||
| 12-1 | 09181-20159 | Shim (0.60) (NLA) | 1 | ||
| 12-2 | 09181-20160 | Shim (0.70) | 1 | ||
| 12-4 | 09181-20164 | Shim (0.90) | 1 | ||
| 12-5 | 09181-20167 | Shim (1.00) | 1 | ||
| 12-3 | 09181-20162 | Shim (0.80) (NLA) | 1 | ||
| 13-4 | 09181-20172 | Shim (1.10) (NLA) | 1 | ||
| 13-5 | 09181-20176 | Shim (1.20) (NLA) | 1 | ||
| 13-2 | 09181-20164 | Shim (0.90) | 1 | ||
| 13-3 | 09181-20167 | Shim (1.00) | 1 | ||
| 13-1 | 09181-20162 | Shim (0.80) (NLA) | 1 | ||
| 14-1 | 57611-98602 | Propeller Shaft Assembly (NLA) | 1 | ||
| 14-2 | 57611-91J00 | Propeller Shaft Assembly | 1 | ||
| 15 | 57621-98600 | Clutch Dog Shifter (NLA) | 1 | ||
| 16 | 09202-04016 | Pin | 1 | ||
| 17 | 09440-05039 | Spring | 1 | ||
| 18 | 09440-24007 | Clutch Dog Spring | 1 | ||
| 19 | 57631-98601 | Push Rod | 1 | ||
| 20 | 57632-98501 | Push Pin | 1 |
1) All quantities shown are the total used for that part.
2) Dimensions of the parts in catalog are in Millimeters
3) Abbreviations used in catalog are as follows:
AR: As Required
ASSY: Assembly
E.NO.: Engine Number
F.NO.: Frame Number
D: Diameter
ID: Inside Diameter
OD: Outside Diameter
L: Length
LH(PORT): Left Hand Side
RH(STBD): Right Hand Side
PTT: Power Tilt & Trim
NT: Number of Teeth
OPT: Optional
OS: Oversize
STD: Standard
T: Thickness
US: Undersize
W: Width
W/: With
S, L, X, XX: Transom Type
SUS: Stainless Steel
S/N: Serial Number
(NLA): No Longer Available - Discontinued
Type:
S - Short Shaft 15"
L - Long Shaft 20"
X - X Long Shaft 25"
XX - XX Long Xhaft 30"
4) Inner Parts of an Assembly - Part name with a dot (.) in front as shown in the description column indicates the component of the assembly is also available individually and is included with the part above it.
